新買的asus 筆電找不到secure boot選項

 新買的asus win11筆電需要降級裝win10，插入安裝win10的usb，就會出現"secure boot violation invalid signature detected. check secure boot policy in setup"的錯誤。

看到這個就是去bios把secure boot的功能關掉就對了，但進到bios裡，卻一直找不到。

後來才查到，要先把fast boot的功能關閉，secure boot的選項才會出現。

The newly purchased ASUS Win11 laptop needs to be downgraded to install Win10. When inserting the Win10 installation USB, an error message "secure boot violation invalid signature detected. Check secure boot policy in setup" appears.

To resolve this, you need to disable the secure boot feature in the BIOS. However, upon entering the BIOS, the option was not found.

Later it was discovered that the fast boot feature needs to be disabled first for the secure boot option to appear.

win10電腦麥克風沒反應 收不到音

某台asus win10的筆電內建麥克風跟外接耳麥，都收不到音。

但在裝置管理員裡都有找到設備，所以就更新驅動，結果還是沒用。

後來拿閒置硬碟換上去裝了win11後，居然都沒問題，那表示硬體沒故障。

在換回win10 後，突然想到，去設定裡面看看，結果發現在"隱私權"裡面有一個"麥克風"的設定，有一個"存取此裝置的麥克風"居然是關閉的，改成開啟後，麥克風就正常了。

An ASUS laptop running Windows 10 had issues with both the built-in microphone and external headset not picking up any sound. Even though the devices were detected in the Device Manager, updating the drivers didn't solve the problem.

Later, when a spare hard drive was installed and Windows 11 was installed on it, surprisingly, there were no issues with the microphone. This suggested that there was no hardware fault.

Upon reverting back to Windows 10, checked the settings. It was discovered that under "Privacy," there was a setting for "Microphone," and the option to "Allow apps to access your microphone" was inexplicably turned off. After toggling it on, the microphone started working properly again.

所有網路共用資料夾都連不上 錯誤代碼:0x80004005

 有台win7電腦有時後會突然連不到所有的共用資料夾都連不上 ，錯誤代碼都是0x80004005。

但上網都正常，去ping那些共用資料夾的主機也正常。

經查才發現，那個win7電腦的網卡內容裡，少了很多項目，正常的應該要像下圖一樣，但那台電腦裡的網卡內容只剩ipv4的設定。

要把其他功能找回來，就只要按下左下方的"安裝"，裡面就有其他項目可以選，選好後馬上就會裝回來了，但是要重開機後，會生效。

Sometimes a Windows 7 computer suddenly cannot connect to any shared folders, and the error code is always 0x80004005.

However, internet browsing works fine, and pinging the hosts of those shared folders also works.

Upon investigation, it was found that many items were missing from the network card settings of that Windows 7 computer. Normally, it should look like the image below, but the network card settings on that computer only have IPv4 configuration.

To restore the missing functionality, simply click on "Install" at the bottom left, where there are other items to select. After selecting the desired items, they will be installed immediately, but a reboot is required for the changes to take effect.

outlook 自動儲存尚未傳送的郵件

有的使用者不知是不是信件開太多，pst又掛載一大堆，三不五時outlook就會突然都沒反應，雖然從工作管理員查看，cpu還是有在處理，但每封信或是outlook主視窗上面所有的鈕都無反應，只能強制關係。

這時後如果有些信寫到一半還沒寄出會存成草稿，就會怕資料不見。 

outlook裡面有一個自動存到草稿的功能，就在"選項"-->"郵件"裡面，可以設定幾分鐘內沒寄出的信自動儲存。

如果是正常方式關閉outlook，系統會問你，要不要存，你選擇不存，就算超過設定的時間，也不會存到草稿。

但若不小心outlook當掉，超過時間的那些信，其實就可直接在開啟outlook後在草稿匣內找到，這功能還蠻實用的。

電腦登入後都會啟動一個程式Bright Data

下載格式工廠來做一些影片轉檔時，發現電腦右下角工具列，多了一個程式"Bright data"，不知是什麼東西。

每次登入電腦就會啟動，在windows啟動列表中，卻找不到這個項目，電腦的程式安裝清單內也沒有。

查了一下才發現這是做網路代理的程式，但被被不肖份子濫用，使個人設備成為攻擊跳板。

https://www.cc.ntu.edu.tw/chinese/cert/cert20230815.asp  這個網頁有提供移除方法。

簡單的說就是用Autoruns.exe或procexp.exe去找搜尋net_updater64.exe、net_updater32.exe及brightdata.exe或服務Brightdata Service是否持續運行，找到就把這個程式刪除。

When downloading Format Factory to perform some video conversions, I noticed a program called "Bright data" appearing in the toolbar at the bottom right corner of my computer screen. I was unsure what it was.

Every time I logged into my computer, it would start up, but I couldn't find it in the Windows startup list, nor was it listed in the installed programs on my computer.

After some investigation, I discovered that it's a program used for internet proxies, but it has been abused by malicious actors, turning personal devices into attack proxies.

This webpage (https://www.cc.ntu.edu.tw/chinese/cert/cert20230815.asp) provides a method for removing it.

In short, you can use Autoruns.exe or procexp.exe to search for net_updater64.exe, net_updater32.exe, and brightdata.exe, or check if the Brightdata Service is continuously running. Once found, you can delete the program.

ESXI 7.0 安裝好WINDOWS 2019 無法使用ctrl alt del

剛裝好一台 ESXI 7.0，在上面建好一台win2019的虛擬機後，要傳送ctrl +alt +del做登入時，都沒反應。

之前也遇過，不過那是做了windows更新，裝到了vmtool造成的，這次卻是裝好win2019就沒辮法登入了。

後來發現是因為裝好後，通常都會直接選擇"開啟瀏覽器主控台"，然後操作，有時後傳送ctrl +alt +del會失效。

改用"啟動遠端主管台"來傳送ctrl +alt +del，就可以了。

Just installed an ESXi 7.0 server, and after setting up a Windows Server 2019 virtual machine on it, I found that pressing ctrl + alt + del to log in doesn't work.

I've encountered a similar issue before, usually caused by Windows updates or installing VMtools. However, this time, even after setting up Windows Server 2019, I couldn't log in.

Later, I realized that after installation, I typically chose "Open Browser Console" directly, and sometimes sending ctrl + alt + del wouldn't work.

Switching to "Launch Remote Console" to send ctrl + alt + del solved the issue.

利用python做台指期當沖自動交易~~失敗

 利用python做台指期當沖自動交易~~跑了快三個月吧。

程式本身沒什麼問題，大概就是停損出場會滑價，其他方面執行上是沒什麼問題。

但失敗了，因為策略太爛了，雖然風報比把2:1，但太常停損了，勝率太低，所以最重要的還是策略，程式只是個輔助。

現在就停止當沖，在好好想想策略吧。

EDGE開啟pdf檔直接另存

 有時後用EDGE在瀏覽網頁時，看到一些PDF檔，EDGE可以直接顯示，不用另存成PDF檔，再用 PDF reader開啟。

如果希望直接存在PDF檔，不要在EDGE中直接開啟，可以調整機碼來達行。

機碼位置如下，如果沒有的話，可以自行手動新增，設定好要重開機才會生效。

Sometimes, when browsing web pages using EDGE, you may come across PDF files that EDGE can display directly without the need to save them as PDF files and then open them with a PDF reader.

If you prefer to save the PDF file directly instead of opening it in EDGE, you can adjust the registry to achieve this.

If you cannot find this registry entry, you can manually add it yourself and ensure that the changes take effect after restarting your computer.

WIN10 安裝framework 3.5失敗 0X800F0954

 win10在裝framework 3.5一直失敗，錯誤代碼是 0X800F0954 。

有人說要去HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU\ 裡面調機碼，把UseWUServer的值改成0。

但發現自己的電腦裡並沒有這個機碼，所以就手動新增，設定好重開機，就可以成功安裝。

Windows 10 fails to install Framework 3.5, and the error code is 0X800F0954.

Some suggest modifying the registry key at HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU\ by changing the value of UseWUServer to 0.

However, it was found that the registry key was not present on the computer, so it was manually added. After configuring and restarting, the installation was successful.

WINDOWS複製資料夾 包含權限

 如果要把A資料夾整個完整複製，包含裡面的權限跟所有資料，然後名稱變成B資料夾。

而且B資料夾本身的權限必須跟A資料夾相同，可以使用robocopy這個內建指令。

執行指令前要確認B資料夾不存在，再執行指令。

指令: robocopy D:\A D:\B /E /COPYALL

If you want to completely copy the entire A folder, including its permissions and all data inside, and rename it to B folder, you can use the built-in command robocopy.

Ensure that the B folder does not exist before executing the command.

Command: robocopy D:\A D:\B /E /COPYALL