很慘的一個月,都在賠,賠了3500元左右。
今年績效目前看來真的慘,1口單連3%的獲利都沒有,天吶。
某款ACER的筆電都有這個通病,電腦用到一半就會跳"顯示器驅動程式 igfx 停止回應,並已順利恢復。"的錯誤,目前解法就是
開始 -> 執行 -> regedit
進入 HKLM\SYSTEM\CurrentControlSet\Control\GraphicsDrivers
Windows 32 位元
新增 [DWORD (32 位元)] 值。
名稱:TdrDelay
值:8
Windows 64 位元
新增 [DWORD (64 位元)] 值。
名稱:TdrDelay
值:8
A specific issue commonly found in certain models of ACER laptops is the error message "Display driver igfx stopped responding and has successfully recovered" that occurs when using the computer. Currently, the workaround for this issue is as follows:
Click on the Start menu, then go to Run.
Type "regedit" and press Enter to open the Registry Editor.
Navigate to the following path: HKLM\SYSTEM\CurrentControlSet\Control\GraphicsDrivers
For Windows 32-bit:
4. Create a new DWORD (32-bit) value.
Name: TdrDelay
Value: 8
For Windows 64-bit:
4. Create a new DWORD (64-bit) value.
Name: TdrDelay
Value: 8
By adding this registry value, you can adjust the TDR (Timeout Detection and Recovery) delay to a higher value, allowing more time for the graphics driver to respond before the error is triggered. This adjustment may help prevent the display driver from stopping and recovering frequently.
新的WIN10在裝好OFFICE後,執行OUTLOOK時,都會跳出"沒有相關的電子郵件程式可以執行要求的動作。請安裝電子郵件程式,若已安裝,則請在預設程式控制台中建立關聯。"
OUTLOOK使用都正常,但就是三不五時會跳出那個訊息很煩人,已經去控制台的預設程式設定OUTLOOK是電子郵件的預設程式也沒用,最後就是到新增移除程式中,對OFFICE執行修復就好。
When running Outlook on a new installation of Windows 10 after installing Office, you may encounter an error message stating, "There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default Programs control panel."
While Outlook functions properly, this error message intermittently appears, causing annoyance. Even after setting Outlook as the default email program in the Default Programs control panel, the issue persists. In such cases, performing a repair of the Office installation through the "Add or Remove Programs" feature can resolve the problem.
最近把台指跟海期的當沖策略都修正了一下,停損都改成移動停損,但這是要看分k去調,所以跟下單程式裡的移動停損不太一樣,無法使用。
手動就有個缺點,就要常常去自已調整,沒調整到就麻煩了。
像今天小台沒調到,本來賠10點變40點,暈了我。
然後海期今天當沖也輸錢,雙殺啊。