永豐 shioaji api 登入後只有證券帳號 沒有期權帳號

跟期貨營業員確認已申請好了shioaji的api後，在python下指令要列出帳號清單，發現都只有證券帳號，沒有期權帳號，有點怪。

後來上了永豐api官方的telegram去發問，才知道原來當初在申請api key的時後，因為只有證券戶，期貨戶還沒開好，所以申請api key的過程，只有證券戶可以勾選，所以用那組api key登入時就只有證券帳號可以用。

重新在申請一次api key，勾選期權選項後，登入測試就有列出期權帳戶了。

Greenbone Security Assistant 掃描錯誤 : Interrupted at 0 %

之前建了一台 Greenbone Security Assistant做弱點掃描，都很正常，掃完就沒管它，過了快一個月，要在掃一些之前掃過的主機時，工作開始後沒多久就會出現"Interrupted at 0 %"的錯誤，重試幾次都一樣，也沒找到什麼資訊，直接重開機吧。

然後就好了!!!!

Greenbone Security Assistant Scanning Error: Interrupted at 0%

Previously, I set up a Greenbone Security Assistant for vulnerability scanning, and everything was working fine. Once the scans were completed, I didn't pay much attention to it. After almost a month, when I tried to scan some hosts that were previously scanned, I encountered an error shortly after starting the scan, stating "Interrupted at 0%". I retried several times, but the error persisted, and I couldn't find any helpful information. Eventually, I decided to restart the machine.

And guess what? The issue was resolved after the restart!

突然連不到共用資料夾 error code:0x8007003

 某電腦突然無法連線到任何共用資料夾，不管是windows分享的或nas分享的。

直接ping分享的主機名稱或ip都有通，但要連資料夾都會出現0x8007003的錯誤。

查了一下，原來是dns client這個服務被關閉了，預設應該要是自動才對，把這個服務在啟動後，問題就解決了。

Suddenly unable to connect to the shared folder error code: 0x8007003

A certain computer suddenly cannot connect to any shared folders, whether they are shared through Windows or NAS.

Directly pinging the hostname or IP of the shared host is successful, but when trying to connect to the folders, an error with the code 0x8007003 appears.

Upon investigation, it was discovered that the DNS client service had been disabled. It should be set to automatic by default. After starting this service, the issue was resolved.

synology升級失敗"此檔案可能已損毀"

 Synology的firmware太舊，管理程式也太舊，要在管理介面上用自動更新。

但卻一直顯示這個是最新版了，所以就手動去下載最新的版本來用手動更新。

結果下載好的檔案透過管理介面上傳後卻一直顯示此檔案可能已損毀。

試了幾個比較新的版本都如此。

然後查了一下才發現原本的版本太舊(6.2)，沒辦法直接7，要先下載6.3手動更新，更新完成後，自動更新的功能也恢復正常，就利用自動更新在升到最新版就行了。

Failed Synology upgrade: "This file may be corrupted"

The firmware on the Synology device is too outdated, as well as the management software. To perform an update, the automatic update option is selected within the management interface.

However, the system keeps showing that the current version is the latest, so the decision is made to manually download the latest version and perform a manual update.

After downloading the file, it is uploaded through the management interface, but an error message stating that the file may be corrupted keeps appearing.

Several newer versions are attempted, but the issue persists.

Upon further investigation, it is discovered that the original version (6.2) is too outdated to directly upgrade to version 7. It is necessary to first download version 6.3 and perform a manual update. After completing the update, the automatic update functionality is restored, allowing for an upgrade to the latest version using the automatic update feature.

OPENVAS(GVM)進行弱點掃描會造成網域帳號被鎖住

在使用 OPENVAS對內部電腦進行弱點掃描，發現一個問題，就是會造成一些AD帳號因輸入太多次錯號密碼被鎖住。

個人猜測是在做掃描時，可能會隨便找一些帳號做登入測試，剛好有人的帳號就是一樣的，所以就被鎖了。

帳號被鎖，可以參考下列這個網站的教學，來查是哪一台設備在在做登入驗證的行為。

https://evotec.xyz/active-directory-how-to-track-down-why-and-where-the-user-account-was-locked-out/

OPENVAS(GVM) Vulnerability Scanning Causing Domain Account Lockouts

During the use of OPENVAS for vulnerability scanning on internal computers, I encountered an issue where it resulted in some AD accounts getting locked due to multiple incorrect password attempts. My personal speculation is that during the scanning process, the tool may attempt to log in using random accounts, and if there happens to be a match with a valid account, it leads to the account being locked.

To determine the source of the account lockouts, you can refer to the tutorial provided on the following website. It explains how to track down the device responsible for the login authentication attempts:

https://evotec.xyz/active-directory-how-to-track-down-why-and-where-the-user-account-was-locked-out/

centos 8 yum 更新失敗 - 同步倉庫 'AppStream' 快取失敗，忽略這個 (Failed to synchronize cache for repo)

新架了一台Centos 8的主機，要用yum先做一些元件更新時，都會跳出同步baseos/appstream/extract 快取失敗的問題。

查了一下，原來是centos8的repo路徑有變，但設定檔裡的路徑還是舊的，所以要改掉。

設定檔的路徑在/etc/yum.repos.d/，裡面有很多xxx.repo檔，檔案裡都有一個baseurl=httpxxxxxxxxxxxxxxxxxxxxxx的路徑，要改掉。

大部分國外的網站都說是把原本的mirror.centos.org改到vault.centos.org，大陸那邊的網站則是說改到http://mirrors.cloud.aliyuncs.com。

後來研究了很久，自己是改到https://mirrors.aliyun.com/centos/8-stream/xxxxxxx，這個網站可以直接用瀏覽器連上，後面的xxxx是要看你的錯誤訊息，看你是哪個快取找不到，就去網站上找到相對應的路徑，貼到設定檔上，就行了。

如果出現下列訊息，也會有可能是提供的網站已不存在，所以會有403的錯誤碼。

搞了兩天才弄好，分享給大家看一下，另外就是防火牆要注意，因為後來發現設定沒錯，但還是連不上，是因為自己的防火牆有擋一些東西，所以如果設定改好還失敗，可以查檢一下防火牆。

CentOS 8 Yum Update Failure - Failed to Synchronize Cache for 'AppStream' Repository

I encountered an issue with my newly deployed CentOS 8 server where I couldn't perform component updates using Yum. Every time I tried, I received an error indicating the failure to synchronize the baseos/appstream/extract cache.

After investigating, I discovered that the repository paths for CentOS 8 had changed, but the configuration files still contained the old paths, requiring modification. The configuration files are located in /etc/yum.repos.d/ and contain multiple xxx.repo files. Within each file, there is a baseurl=httpxxxxxxxxxxxxxxxxxxxxxx path that needs to be updated.

Most foreign websites suggested replacing the original mirror.centos.org with vault.centos.org, while some Chinese websites recommended using http://mirrors.cloud.aliyuncs.com. After extensive research, I found that modifying it to https://mirrors.aliyun.com/centos/8-stream/xxxxxxx worked for me. This website can be accessed directly through a browser, and the xxxxxx part depends on the error message you receive. Look for the corresponding path on the website and paste it into the configuration file.

If you encounter the following message, it's possible that the provided website no longer exists, resulting in a 403 error code.

After spending two days troubleshooting, I wanted to share this solution. Additionally, be mindful of your firewall settings. In my case, even though my configuration was correct, I still couldn't establish a connection. It turned out that my firewall was blocking certain elements. So, if you've made the necessary configuration changes but are still experiencing issues, check your firewall settings.

powershell get 資料後以表格寄出

 有時後要用powershell去撈一些資料，然後寄出，如果已經用powershell篩出要的資料再寄出，語法不難，網路上一堆。

但假設我撈出了兩欄資料，我希望寄出來，是有表格的型式，這就難了。

在爬了一堆文後，找到一篇很實用的文章

https://evotec.xyz/sending-html-emails-with-powershell-and-zero-html-knowledge-required/

一開始就是先用get-xxx去把要的資料找出來，並且設成一個變數。

二是建立一個迴圈，把撈出來的資料依序帶入到一個表格容器裡面，設成一個變數。

三是用html語法建立一個表格，設定表格的樣式，抬頭名稱，欄位名稱，然後把步驟二的資料放到這個html的表格內，也是要設成一個變數。

四就是最後一步，用powersell發mail的指令發信，信的內容就是把步驟三產生的變數帶入，就完成了。

依照這個架構，就可以利用powershell去產出表格資料寄給需要的人。

Sometimes, I need to fetch data using PowerShell and then send it out. If I have already filtered the desired data using PowerShell, sending it out is not difficult, as there are plenty of examples available online.

However, if I want to send the fetched data in a tabular format, it becomes more challenging.

After searching through various resources, I found a very useful article:

https://evotec.xyz/sending-html-emails-with-powershell-and-zero-html-knowledge-required/

First, I use "Get-xxx" commands to retrieve the desired data and store it in a variable.

Next, I create a loop to iterate through the fetched data and populate it into a table container, which is stored as another variable.

Then, I use HTML syntax to create a table, set its style, define column headers, and incorporate the data from the previous step into the HTML table, which is stored as a variable as well.

Finally, in the last step, I use PowerShell's email sending command to send the email, and the content of the email is populated by inserting the variable generated in the previous step.

By following this framework, I can utilize PowerShell to generate tabular data and send it to the intended recipients.

永豐 shioaji api 一直登入失敗 ValueError

 一開始學習就充滿挫折~

裝好shioaji套件後，最一開始就是先登入，在這關就卡三天，找到網路上一些教學，也有官方出的PDF檔文件，結果登入後都很怪，雖然有session up的字眼出現，但又有產生其他錯誤。

登入後常會看到這兩種錯誤訊息

ValueError: The seed must be exactly 32 bytes long或ValueError: Invalid character '0'

後來又在官網上在仔細查看，發現了一小段重要的說明，就是以前登入的帳號密碼，是跟下單軟體一樣，用身份證字號去登入，但現在api的登入帳號密碼已經不同了。

是要先去永豐金理財網這個網站，登入後裡面有個API管理的功能，新增一組系統自動產生的超長帳號跟密碼來搭配api登入，程式碼也跟舊的不太一樣，可以參考官網的教學 https://sinotrade.github.io/zh_TW/tutor/login/  

照網站教的，api登入就成功了，不會有那些奇怪的錯誤訊息。

永豐 shioaji 無法安裝

 在python裡要安裝永豐API要用的一個套件shioaji時，一直失敗，就找不到這個套件。

後來才發現，這個套件不支援自己電腦內的python3.11版。

所以就要另外裝一個python舊版的環境，目前測試是在3.8跟3.9都可以裝。

Anaconda 建立不同版本python環境

 最近在學Python，是直接去下載Anaconda來安裝，裝好後就有Python可以使用。

平常在寫程式是，是利用裡面已經有的SPYDER或是Jupyter notebook，在裡面編寫程式跟執行。

但最近要下載一個套件，在目前使用的Python版本裡不支援，需要用比較舊的Python才行。

這時Anaconda就有個很好用的功能，就是它可以產生不同的虛擬環境。

Anaconda剛裝好的時後，就會有預設的一個環境，搭配當下一起安裝好的Python。

如果想要用改的版本的Python，可直接建立另一個虛擬環境，選擇不同版本的Python就行了。

這時SPYDER或是Jupyter notebook還是會用預設的Python版本在執行，所以就要做一下調整。

詳細方法可以參考這篇，寫的很仔細。

https://www.modb.pro/db/194246 

Recently, I've been learning Python by downloading and installing Anaconda. Once installed, Anaconda provides a Python distribution that I can use.

When writing code, I typically utilize the built-in IDEs like Spyder or Jupyter Notebook that come with Anaconda. I write and execute my code within these environments.

However, I recently needed to download a package that is not supported by the current version of Python I'm using. I needed an older version of Python for compatibility.

This is where Anaconda's useful feature comes in: it allows the creation of different virtual environments.

By default, Anaconda creates an environment with the Python version that was installed at that time.

If I want to use a different version of Python, I can simply create another virtual environment and choose the desired Python version.

In this case, Spyder or Jupyter Notebook will still use the default Python version for execution, so some adjustments need to be made.